M430- 100V 10A Digital Voltmeter Ammeter Dual Display

 1,160

M430  0-100V  10A with 4 Display volt+ Ampere+ Temperature+ Watts

This is a voltage and current power meter. The displayed value can be fine-tuned through an adjustable resistance, but the actual voltage and current of the circuit under test will not be affected.

Do not use a power supply above 30V during use, otherwise it will cause damage.

The 10A range product comes with a shunt resistor, which can be used after connecting the meter in series with the load.

Operating Voltage:

The working voltage is DC 4~30V, it is recommended to use DC5~12V.

Range:

The voltage range is 0~100V, the display mode below 10V is 0.00V, the voltage starts at 0.2V, and the error is ±1V.The current range is 0~10A, the current starts at 0.03A, and the error is ±0.1A

DC0.20V~9.99~10.0~100V(±1V)

DC0.03A~9.99A(±0.1A)

Shunt (manganese copper):

Integrated shunt resistance, short circuit alarm is normal in no-load test; it can be used according to the wiring diagram.

Display Power Measure temperature.

Power and current will be displayed alternately, no need to set.

Temperature can be measured by connecting the separately sold NTC sensor

Note:

Ntc sensor not included.

Cart

Your Cart is Empty

Back To Shop